EGON Water-Hub

The All-In-One

Nucleus of your

Water Supply System.

EGON
Water-Hub is now available for pre-order. Delivery from mid February, 2021.

THE NEW, BRILLIANT WAY TO INSTALL

A WATER SYSTEM

 

THIS is a remarkable cost and time-saving device called the EGON Water-Hub. Imagine a simple, extremely robust pre-plumbed box with water in and outputs, pump, valve and temperate control value all in a single, easy to fit unit. Make huge savings in labour time, reduce complexity and improve quality of your installations. 

 

No more need for plumbing specialist expertise when building water set in 4WDs, RVs, boats, and even dwellings that use a non-mains water supply.

All the difficult stuff is done for you, with the best quality components available today.

 

MAKING WATER SYSTEM INSTALLATIONS FASTER AND SMARTER.

FEATURES:

  • Temp control mixes cold + hot to get temp right every time.

  • Suitable for shower and kitchen, cold and hot.

  • Clean drinking water outlet.

  • Tank input connection.

  • Alternative external pickup / bucket connection.

  • Grey water tank connection with failsafe contamination protection. 

  • Connects to any water heater available today.

  • Twin 12V pump for switched supply.

  • Optional hose kit available.

  • Saves water, time and money!

SUPERB QUALITY. AUSSIE-MADE

Built from the best components we can find for a long operational service life, and it's assembled in Australia. But the best part is that the EGON Water-Hub can be installed by anyone, anywhere.

FOOL PROOF

One of the biggest challenges of water installations is the lack of expertise, and the resultant quality shortfalls. With the Egon Water-Hub, there are no need for plumber's tape, special tools, or to go shopping for parts.

INSTALLATION GUIDES

The unit is marked with input and output instructions and every unit comes with an installation guide. These guides are backed up up by installation videos on our YouTube channel. 

(Installation videos will be available March 2021).

.

MORE FEATURES:

  • Steel, waterproof case suitable for exterior or interior fitting.

  • Reversible lockable lid for fitting versatility.

  • Standard pipe thread sizes so no special parts needed.

  • Optional pipe kit available.

  • Steel heavy-duty mounting kit included.

  • Supplied with 4m cable for 12V connect.

  • Requires 12V input. Max 10 amps.

  • Input choices:

    • Tank

    • External source. e.g. bucket, grey tank.

    • Hot water heater/boiler.

  • Output choices:​

    • Shower via thermostat.​

    • Tap, direct from tank.

WHAT YOU NEED TO DO . . .

  • Buy it. It's supplied with a 16-piece heavy-duty steel mounting kit.

  • Mount it in a place inside or out, where access via the door is reasonably easy.

  • Run pipes from the tank and/or water boiler/external intake.

  • Run pipes to your tap and/or shower.

  • Standard threads have been used so if you want to build a system, additional fittings can be found at any hardware store.

  • Run 12V dc to the supplied 4M length of wire.

  • You're done. It's that easy.

  • Now you have hot/cold accurately temperature-controlled water on demand. 

© 2021 Klarmann White Innovations PTY LTD